# Glossary

## Abatement

Work that removes, encloses or seals a hazardous material such as asbestos or lead paint so it no longer releases dust or fibres. The method depends on the material, its condition and local rules.

## Asbestos

A group of natural mineral fibres once used in insulation, roofing, siding, flooring and other building products. Fibres can enter the air when the material is damaged or disturbed.

## Asbestos-containing material

Any building product that a laboratory test shows contains asbestos. Suspect material is treated as asbestos-containing until a test says otherwise.

## Friable

Describes material that can be crumbled or reduced to powder by hand pressure. Friable asbestos releases fibres more easily than intact, bonded material.

## Encapsulation

Sealing a hazardous material with a coating or binder so it stays in place instead of removing it. It leaves the material in the building, so it needs a record and later checks.

## Enclosure

Building an airtight barrier around a hazardous material so it cannot be disturbed. Like encapsulation, the material stays in place.

## Containment

A sealed work area, often plastic sheeting under negative air pressure, that keeps dust and fibres inside while work goes on.

## Asbestos survey

An inspection of a building to find and sample materials that may contain asbestos. A demolition or renovation survey looks at the areas the work will disturb.

## Clearance testing

Air sampling and a visual check after abatement to confirm the work area is clean before the containment comes down. Ask who does the test and whether they are independent of the contractor.

## Lead abatement

Work meant to permanently remove or control lead paint hazards. It differs from routine renovation that happens to disturb painted surfaces.

## Lead-safe work practices

Methods that limit lead dust during renovation, repair or painting, such as containment, wet methods and careful cleanup. Check your local rules for who must use them.

## Mold remediation

Assessment and cleanup of mold growth and the water damage behind it. Lasting results depend on fixing the moisture source first.

## Notification

Advance notice that some jurisdictions require before asbestos removal or demolition. Rules and lead times differ, so check your local rules or ask the contractor.

## Licence number

The registration or licence number a contractor gives on a claimed listing, with the agency that issued it. Confirm its current status with that agency before work starts.
